Introduction of Rotary Dryer

Rotary dryer is suitable to dry metallic and nonmetallic mineral, clay in cement industrial and coal slime in coal mine,etc. Rotary dryer can be widely used to dry various materials, and it is simple to be operated.

The dryer is made up of a large, rotating cylindrical tube, usually supported by concrete columns or steel beams. The dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under gravity. Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern. In some cases, a combination of direct-indirect heated rotary dryers are also available to improve the overall efficiency(via wikipedia).

Rotary Dryer Technical Parameters

Model Rotation speed
Input Air temperature
GZΦ600×6000 3-8 0.5-1.5 less than 700 3-5 3.0 2.9
GZΦ800×8000 3-8 0.8-2.0 less than 700 3-5 4.0 3.5
GZΦ800×10000 3-8 0.8-2.5 less than 700 3-5 4.0 4.5
GZΦ1000×10000 3-8 1-3.5 less than 700 3-5 5.5 5.6
GZΦ1200×10000 3-8 1.8-5 less than 700 3-5 7.5 14.5
GZΦ1200×12000 3-8 2-6 less than 700 3-5 11 14.8
GZΦ1500×12000 2-6 3.5-9 less than 800 3-5 15 17.8
GZΦ1800×12000 2-6 5-12 less than 800 3-5 18.5 25
GZΦ2200×12000 1.5-6 6-15 less than 800 3-5 18.5 33
GZΦ2200×18000 1.5-6 10-18 less than 800 3-5 22 53.8
GZΦ2200×20000 1.5-6 12-20 less than 800 3-5 30 56
GZΦ2400×20000 1.5-6 18-30 less than 800 3-5 37 60
GZΦ3000×20000 1.5-6 25-35 less than 800 3-5 55 78
GZΦ3000×25000 1.5-6 32-40 less than 800 3-5 75 104.9

Loading image... Loading image... Loading image... Loading image... Loading image... Loading image... Loading image... Loading image... Loading image... Loading image...